A number of online stores of different types is growing by leaps and bounds. And if to buy a laptop or gaming console at best price now is not too difficult, what to do when you have not quite normal hobby, like building model airplanes or robotics?
Cracked plastic case compact vacuum cleaner “bumblebee” can be fixed without resorting to the traditional way of gluing. Enough to pull on the housing section of the camera motorcycle wheels, making it a longitudinal slot of the handle of the vacuum cleaner.
Effectively dry cellar will help the old 10-litre bucket in the bottom is drilled several holes or instead of the bottom is placed a large mesh and a bucket is installed in the cellar stand two bricks.
For the rational use of weeds and grass-tops in gardens or allotments of their composted in pits or small towers. I’m doing this: throwing a wooden greenhouse in a box without a bottom size 2000X1000X400 mm.
The burning of rubbish, twigs and grass in a country or a plot you can, of course, and a bonfire. But it is much easier and safer to do it in a special oven-“sigale”.
Blanks of sheet metal with a thickness of 3 – 5mm will be more accurate and easier to bend at home if they are pre-trimmed along the fold lines using the grinder (and if the workpiece is not very long, and with a hand saw) about a third of the thickness of the sheet. And Read more…
To cut large office furniture comfortable when placed on the wooden trestles. However, in the process, the surface of boards can get scratched. To prevent this, wheels should attach a few scraps motorcycle or Bicycle tires: they will prevent the polishing or plastic lining shields from scratches.
A simple device consisting of a Board with a cutout, makes it easy to remove the tight boots. To give the required level from the floor under the Board attached to a wooden block, and the neckline is edged cut rubber tubing to avoid damage to the shoes.
In the multi-individual homes usually have Autonomous water supply system, which consists of a boiler, pipes, radiators and the surge tank. The inner walls of the tank is always wet from the constant evaporation and wetting with the expansion of water in the heating system. The reservoir is intensely rust inside and rust and fills the system, threatening congestion.
To eliminate the crack in the middle of the Board is not so easy, especially if the Board is very wide. Here can help out the following. On both sides of the crack must be nailed two small blocks, fill the crack with glue (carpentry, casein or PVA) and then a clamp to compress the Read more…
