The surfaces are usually not only previously degreased, but cleaned with sandpaper to get the roughness that increases the strength of the connection. The same effect can be achieved if between the abutting surfaces to lay impregnated with glue a thin layer of cotton wool: it will increase glue area and grip will get stronger.
It is not necessary to prevent the buildup of snow on the tracks, it is better to clean them immediately after a snowfall while the layer is still small, and Neoplatonist, fluffy, and easy to work with. Given this, we can use a shovel appropriate design, similar to the dozer blade. Two sheets of plywood Read more…
To nut the connections didn’t loosen during operation of the device, usually put the second (jam nut) or enclose the washer Grover. If such is not at hand or you need to fix the little nut that hard to find a similar washer — rescue improvised, made of… sand paper. Cut out two circles and Read more…
Make one of your tape that’s such a closed circular loop of the standard tape — and she never once help you out when you need to memorize a short text or foreign words. Recorded on a tape, they performed as many consecutive times as you need to memorize.
It so happens that a nail head or screw head, connecting the two wooden parts, you want to hide, to conceal. Here’s one way. Will atsaite chisel a thin layer — literally chips of wood (but not completely) in the place where you want to drive a nail, and hammer it. Then put glue and Read more…
Padlocks have economy wide application, but have one common disadvantage: susceptible to atmospheric precipitation, causing rust, and in winter is frozen and will not open. However, you can protect them using the cut tire of the Bicycle or moped, depending on the size of the castle. Under the lugs of the bracket, the shank is Read more…
Now, many medicinal tablets are Packed in colorful plastic cells, covered with foil or paper. In improvised signal light devices are very convenient to use such cells as the cap-filter for signal lamps.
For those who like to celebrate the New year with unworthy, not an artificial tree, I suggest to make a simple fixture to install it. On the device, it resembles a regular three-jaw Chuck for clamping the tool. Under body fixtures I used a section of pipe 114Х4 Ø 5 mm,length of 120 mm, Read more…
If you want to paint a hollow cylinder or tube, for the convenience of working detail is best to hang, then go easy on it with a brush on all sides. But one obstacle still remains: the suspended pipe will wobble and spin. This can be avoided conceding in the cavity of a stick and Read more…
Of course, it is easier to nail to the box or similar container with two ends of the handle and carry it like a stretcher — but it’s the two of us. And if you have to work alone? Then help out any pair of wheels. Slide them into a suitable tube axle and fasten Read more…
