From used electrolytic capacitor K50-6 you can make the switch knob for the radio. It is necessary to free the glass of the capacitor from the electrolyte, but instead pour epoxy glue. After the glue is slightly hardened, it is pressed greased with vaseline the axis of the pen device — up to complete curing.A. SIKORSKII, Chisinau
Recommend to read
NOT THE CLAMP, AND PIN
For rallying and compression with wooden sticks or planks when gluing, use special clamps carpentry. However, in the absence of them are just a long threaded stud with a couple of nuts...
HOMEMADE SAWMILL
The idea is to share my experience with the readers of "M-K" came to me after reading in No. 2, 1991, notes In Cmaha catching "a Plane on the rails" I Believe that in contrast to the...
