Advice

From old, broken loudspeaker, you can make a stand for electric soldering iron. The main advantage of this design — magnetic clip prevents accidental drop of hot tool on the table.   T. BOYADJIEV, Pleven

The alteration of furniture is sometimes necessary to saw the polished Board. How to do it without spoiling it? I put on the lacquer surface the line cut a thin dry remnant. On the line penetrate into the nail groove cutter, saw blade is made of dense metal. Click easy-easy to Polish filmed with a Read more…

Not only plastic, but also wood rulers, especially the long, at carrying out with their help lines are often displaced under the pressure of the pencil or ruling pen. This does not happen, if a measuring instrument to give a small deflection, heating it over the middle of the steam jet from the spout of Read more…

Scoop up a bucket of water from a deep well is not so simple: it stubbornly refuses to sink, no matter how you pull it by a rope or chain. It is, however, the first attempt to achieve the desired result if to attach to the edge of the metal container cargo. I, for example, Read more…

There just clips and the clips do not come up with designers – and all this only in order to securely attach bench vise on the workbench. Not everyone, however, can be used in a home workshop, for example, those that are installed on the countertop with the screws, nuts and washers. But such a Read more…

Old “turntable”, so called hams top panel of the player may find unexpected new use of the young sculptors as a rotary table. Put on a disc workpiece rotates easily by any party that facilitates the sculpting and paint miniature figurines.   M. MALYSHEV

Over time, the cork in the thermos like shrinks, it decreases in diameter and tightly stops clogging his throat. To restore the dimensions of the tube is possible by drilling it from the top blind hole and entering the back benches of thorn — wood truncated cone.

Every housewife in the kitchen Arsenal are the rolls of napkin paper or foil. But to use them and store them without special tools is not very convenient. Make a simple stand — and you will forget about these inconveniences. It consists of a wooden base, sawn from any of the Board, and of a Read more…

This advice will be useful to those involved in the drinking of low-melting materials. Take a spare soldering tip high power (over 65 watts), flatten the end and rivet it to a steel stamped Cup — for example, the wheel cover of a stroller or a spoon of suitable shape. Align the hole in the Read more…