Advice

Every housewife in the kitchen Arsenal are the rolls of napkin paper or foil. But to use them and store them without special tools is not very convenient. Make a simple stand — and you will forget about these inconveniences. It consists of a wooden base, sawn from any of the Board, and of a Read more…

This advice will be useful to those involved in the drinking of low-melting materials. Take a spare soldering tip high power (over 65 watts), flatten the end and rivet it to a steel stamped Cup — for example, the wheel cover of a stroller or a spoon of suitable shape. Align the hole in the Read more…

His appearance holder, obviously, was due to the fact that it was not possible to attach the handle to the glass. Modern chemistry allows you to do this even at home. Take the glue BF-2 or “Moment”, and of metal strips vignette the handle In the part that will fit the glass and drill a Read more…

The wall of the tank is often covered with the inner side greenish tinge. It is usually removed with a scraper, not releasing aquarium. Thus inevitably damaged plants, turbid water. The same operation can engage in a much more painless. Take a magnet and a steel disc to align them to each other from different Read more…

Those who use kettlebell wall clock-hodinami know” that when lifting weights hang down with chain often broken original position of the case, affecting their accuracy. To avoid this, I suggest remove the weight, and the ends of the chains to connect to a single closed chain, Remains to be done and the weight of the Read more…

No-no and remind myself of the harsh winter the people of our Midland… And when the temperature falls below the normal are given to take additional measures to insulate the apartment. One of the most simple but effective ways — the creation of another air gap in the window opening. Enough to take a sheet Read more…

The industry produces at capital drilling machines model 2М112 equipped with cartridges of type 2B for drill diameter up to 16 mm with straight shank. However, this shank us made drill bits up to 10 mm. larger is the Morse taper. To use them, I suggest to make the bushing. A tool with a conical Read more…

The usual tip is a spatula she is hidden by a rubber tube. This sheath not only protects the working tip of a screwdriver, but pockets. Pulled the head of the screw, it will screw it in tight spaces. With this nozzle easier to hold a screwdriver in Spiez unscrews the screw with a spherical Read more…

When I need to drill a hole in glass, I use this way. In the Chuck of the drilling machine is clamped copper tube length of 100 mm (the diameter is adjusted depending on what you need the hole). Tube pre-filled with a mixture of any mineral oil with dust, corundum, emery. When drilling rate Read more…