There is a reliable way to check the quality of sharpening cloths or disk saws. Light a candle and hold the flame on the teeth. This should be done evenly and quickly without overheating the metal. If one of the teeth when sharpening, you missed the flame in this place will be Smoking. Mark in patches of soot on the steel surface, clearly indicates poorly sharpened teeth.
Recommend to read
GLIDER TAKES OFF FROM THE WATER
...A quiet summer evening over the water area of klaipėda seaport appeared strange flying machine: its wings were similar to a lattice, and the pilot was housed in a tiny cabin,...
THE FOG CREATES A SPEED
The boat standing at the dock, nothing attracted attention. Except that instead of a outboard motor on it was a propulsion system with a propeller of relatively small diameter at the...
