Advice

When disassembling the boxes and shields cements their nails without the work gently unfold to use again. This will require a simple device — a metal finger Ø 10-15 mm with an internal hole whose diameter must be larger than the nail, and the depth is less than the length of its curved portion of Read more…

This upgraded wrench I use for many years and I think it is very convenient. Drill a hole and his lips pressed to two steel pins, I was a versatile tool to unscrew and also hidden castle nuts of various sizes.   V. MANDZUK

Sewing needles save usually stuck in the pads. The same principle can be stored and some carpentry and locksmith tools. Just “pad” for them should not be made of cloth and wool, and metal mesh, the cells of which serve as sockets for chisels, awls, screwdrivers, etc.

To lock in the Assembly of the timber frame elements at a certain angle, usually used bolts or studs. For strength additionally use glue, nails, communication “vpoldereva”. Not less strong, however, get a connection using such a “toothed” washers. The advantage of a significant: parse such a mount is only a few minutes.

For polishing articles made from metal it is best to use special toothpastes — Krokus, GOI. I want to offer recipes for their cook. The first will need the iron sulphate is white crystals after calcination it on a small fire turning into a fine brown powder. If one part mix with three parts of Read more…

Much easier to remove rust from any parts, if its surface is pre-treated with a special compound which is easy to make at home. To do this, simply chop the wax (i.e. candle) in a small container of kerosene so as to obtain a saturated solution. He insisted for about a week, and then moisten Read more…

The lightest three-layer plate with a honeycomb filler can be obtained, if you use this hint. The middle layer is empty matchboxes glued in a checkerboard pattern, for example, the sheet of hardboard and then covered with another sheet of paper, also greased with glue.

Typist reprinting the text follow the lines, moving the ruler. I propose to make a sloping stand of thin sheet steel to strengthen it from the clip folder and find a long longitudinal magnet. Clamp securely holds paper sheet, and the longitudinal magnet is a ruler, mark the desired line. To read the text with Read more…