CLAMP AND VISE

CLAMP AND VISEThere just clips and the clips do not come up with designers – and all this only in order to securely attach bench vise on the workbench. Not everyone, however, can be used in a home workshop, for example, those that are installed on the countertop with the screws, nuts and washers. But such a Vice is easy to make universal, attracted to the fastening lugs two conventional clamps. The upgrades will allow you to mount a vise not only on the bench, but on every table — of course, if you put under the grip of cardboard or plywood gasket.

 

I. SERGEYEV, Moscow

Recommend to read

  • “REVIVAL” ENERGY-SAVING LAMPS“REVIVAL” ENERGY-SAVING LAMPS
    Fluorescent energy-saving lamps in recent years become increasingly popular, despite its relatively high cost. Indeed, all the good these lights are, but the one absurdity of spoiling...
  • THE SOLDERING IRON IS A NEW SOLDERING IRON TIPTHE SOLDERING IRON IS A NEW SOLDERING IRON TIP
    In the practice of Amateur radio is the most time consuming and delicate work — installation of components on the Board. I propose to do to upgrade the soldering iron. Instead of the...