The combined table you see in the figure is intended for a garden or country plot. It can be easily disassembled, so you can put it away for the winter in a shed or under a canopy. It is assembled from two shaped uprights connected in the middle and at the edges by tie boards, with a tabletop laid on top. Variants of the upright shapes are shown in the figure. Dimension C depends on the thickness of the tie boards.
Note that the table mostly consists of modules, that is, interchangeable parts. The boards that make up the tabletop (only the outer ones differ by rounded ends and cutouts) are identical; the uprights and seats are identical as well. Only the central tie board is slightly wider.
The modular method of furniture design makes it possible to assemble different items from the same set of unified parts. For example, from the parts for our summer table you can assemble a bed, and if you put a particleboard (chipboard) sheet on the tabletop, you can also play ping-pong on our table.

1 — base panels; 2 — base lock panel (2 pcs); 3 — seat boards (4 pcs); 4 — lower central base lock panel; 5 — wedges of the central lock panel; 6 — upper central lock panel; 7 — tabletop boards (6 pcs)
No scarce materials are required: to make the table, you need a furniture board or particleboard (chipboard) or fiberboard, several boards 25–30 mm thick, two battens 25x30x50 mm, and screws.
Be sure to paint the finished table: the tabletop and uprights with a light paint, the benches with a dark one. If you prefer to keep the natural color of the wood, coat the table with varnish.
«Modelist-Konstruktor» No. 8’2011



