The Council of the technological plan. For mounting front panels of enclosures of different radiokonstruktor often used galvanized, blue and all shiny screws or bolts, not impressive looking on a dark background. I head saharnau: cleaned with sandpaper “nulevkoy”, degreased cotton swab soaked in Cologne, is heated in the flame of a gas burner until red-hot, dipped in vegetable oil and slowly cooled in air. As a result, the head gets black finishing and is corrosion-resistant. Interestingly, if you use mineral engine oil, the surface is lighter, matte. E. SAWICKI, Korosten
Recommend to read
RIBS – A SERIES
As you know, model airplanes and much hard work the most boring work is making ribs. Most often they are cut from plywood or veneer with a fret-saw or sharp knife, and then push the...
SCISSORS WITH RULER
They say: "measure twice — cut once", but if one of the shear blades to cause a spark or graviroval marker centimeter scale, as shown in the figure, from a preliminary marking in many...
