Good recommendations

Suddenly hit a thaw after a frost can cause a lot of trouble. On the sidewalks and the streets turned into a real ice rink, go is not easy, especially for the elderly. But ice is not terrible, if in advance to stock up on dry sand and a water-resistant glue such as “Phoenix”, “Point-1” Read more…

To permit sheet metal, need metal shears and a line with the Scriber for drawing cut lines. And if you can see the curved workpiece? Use the bolt or stud of suitable length, as shown in the figure, the nut will trace the edge, and the end of the stud resting in a scissors — Read more…

The adapter is machined from steel 45, preferably followed by quenching. The shank follows the shank of the tool factory production. The adapter can be done from the supplied socket wrench to 7.5, optochin it on the sandpaper to the desired shape.   V. CHUDNOVSKY, G. Odessa

In the manufacture or repair of furniture good help are special furniture clamps with the elongated bracket. However, if there are none in the economy, like any other. Long bracket replaces her belt: in “collaboration” with him the clamp will be able to pull, for example, even the legs of the table — as shown Read more…

Camping or at the cottage is easy to make in just a minute original and comfortable, and most importantly—reliable in terms of universal fire candlestick. This will require a tin can and scissors: they incision the soft part of the plate and is bent in the form as shown in the figure.

Everyone who had to drill holes in the pipes or other parts of circular cross-section, knows that this is a difficult task. The drill bit often slips with printed core labels, and the holes are not strictly diametrically. However, to facilitate this work and to improve the quality of the holes, a special conductor is Read more…

Of tubes of different diameter, tightly placed one on another, you can build a jig for drilling end holes in cylindrical rods of various cross sections. For the outer bushings are better to use a steel tube with a thickness of 0.5 mm, and the inner insert can be bent any sheet metal.   V. Read more…

If you have a few small flat brushes, and painting works took fleyts, you can do it yourself. Take two flat brushes, and connect them firmly clamped between two plates of plywood and knocking small nails.

When nastilanie of the sexes the hardest thing is to lay the last Board — not so easy to “drive” it in the remaining slot. Moreover, the width of the gap sometimes lack some few millimeters. How to move the already laid boards, especially if you hit them with a hammer prevents the wall? In Read more…