Flexible shaft from a spark plug DIY tool

Flexible Shaft + Spark Plug

When engaging in technical creativity in a home workshop, where an electric drill with various attachments is often the main tool, a homemade flexible-shaft accessory can be very useful. Especially in cases where drilling, grinding, or polishing operations must be performed urgently and carefully in hard-to-reach places.

Anyone can make such a device if they have a speedometer drive cable (for example, from an S3D motorized sidecar), an SD-48BSM spark plug, two 1000095 ball bearings, a 4 mm steel rod, a 26 mm length of copper or brass tubing 6×1, and a pair of covers from standard electrical connectors with an M18x1.5 thread.

After cracking the ceramic insulator with a hammer, it is removed from the spark-plug body together with the center electrode. The body is then used as the base for the most critical part of the homemade flexible shaft — the head.

Tool made from a flexible shaft and a spark plug
Tool made from a flexible shaft and a spark plug:
1 — connecting sleeve (copper or brass tubing 6×1); 2 — rod (steel bar Ø4); 3 — head (spark-plug body); 4 — ball bearing 1000095 (2 pcs.); 5 — spacer sleeve (2 pcs.); 6 — covers; 7 — flexible shaft; 8 — flexible-shaft flange.

Next, ball bearings are pressed onto a 4 mm diameter rod that has an M3 tool socket and two lightly peened seating surfaces. Using POS-70 solder and a suitable flux, a connecting sleeve deformed at one end into a square is soldered to the rod. The resulting assembly, together with the spacer sleeves, is placed inside the spark-plug body. Then the cable — the flexible-shaft core — is attached, the covers are screwed on, and the device is connected to the electric drive shaft (the drill). That’s it — it is ready for work.

For convenience, the electric drive can be fitted with a removable clamp so that both hands are free.

One more tip. Practice shows that under intensive use, machine oil should be dripped periodically under the flexible-shaft braid.

«Modelist-Konstruktor» No. 2’99, R. SINGATULIN, Saratov

Recommend to read

  • HOW TO EASE RIBHOW TO EASE RIB
    Modelers know how difficult it is to facilitate fine rib, without violating its strength. In the model airplane circled our House pioneers a way of cutting out successfully replaced the...
  • HORIZONTALLY WITH A GUARANTEEHORIZONTALLY WITH A GUARANTEE
      In cases where there is a need to support the work piece in the vise so that its upper face is parallel to their lips, you will help offer a simple fixture. It consists of two...