Iron or drill you need in one corner of the room, and the socket is in another. In this case you can use an extension cord. And for storage you can make a simple and practical device — a coil provided not only for coiling the cord, but to include electric instruments.
Reel for extension cord:
1 — the plywood panel, 2 — receptacle, 3 — cord, 4 — bushing, 5 — plug.
Between the two plywood panels with a thickness of 4-8 mm (see figure) reinforced a wooden or plastic sleeve, which can be wound up to 15 m twisted pair cable. More flap, having cut a handle is attached to the socket from which the cord through the grommet of the coil goes to the plug.
Recommend to read
BY ROWING BOAT – UNDER SAIL!
To get a sailboat - even the simplest one! - one desire is not enough. You have to incur expenses that are sometimes completely ruinous for the family budget. And it takes a lot of time to...
IN THE ARMS OF THE CLAMP
When driving round a pin in the prepared hole in the particle Board there is a danger that tightly the incoming rod will break loose material. To avoid this, pre-shrink this place a...
