Instead of installing switches ship modelers often put on the deck bare conductors or put the bulky switches. Naturally, these alien items spoil the appearance of the model. At the station of young technicians of the city of Sochi for many years put on an improvised model of the microswitches (see figure), Tali. Then put the spring and install the bracket-holder. The deck clip is fastened with copper rivets. The switch is ready. Connecting the wires, you can test the reliability of his work.
Homemade switch:
1 — turret, 2 — base (turret), 3 — puck, 4 — deck, 5 — collector plate, 6 — slider, 7 — clip-holder, 8 — spring, 9 — axis switch, 10 — rivets from copper wire, 11 — mounting wire.
A — view of the switch below (rotated 90°).
A. DOROSHENKO, head of ship modeling circle, g. Gaysin, Vinnitsa region
Recommend to read
HARDBOARD— SCISSORS
Home craftsmen often have to deal with the hardboard (MDF). Whether made furniture, repaired floor, insulated building, whether country — sheet by sheet goes up. And if you need...
AS FOR THE VILLAGE WITHOUT A TRACTOR?
(Continued. Beginning in № 8'02) FRONT AXLE — wheels from UAZ. Balancer axle is made of steel tube section 80x80x6 mm long, the ends of which with longitudinal and transverse...
