Advice

Intractable loosening the tubular connection experienced craftsmen heated with a blowtorch. Almost the same effect can be achieved and more domestic. Spraying the connection with boiling water of an ordinary kettle, due to thermal expansion can “evict” even rusted the pipe joints.

Wrong strike with a heavy hammer can cause serious injury to the hand holding the chisel. Yes, and a hell of a kick in the arm unpleasant. This work will facilitate and protect a simple removable handle (see Fig.), bent from steel strip and fixed at the top of the tool with the bolt-ladder. It Read more…

Guitar string can optionally play to the role… for the blade of the jigsaw. To do this, cut the strings no 5, 6 or 7 must be freed from the braid, insert the jigsaw and rhombic or triangular file to make notches at the required angle. To string not springy, put it in dispute — Read more…

Any stove is the ash pit, and if the fuel is solid, it is always accumulated ash, which occasionally have to shovel. To simplify this work, I invented a kind of scoop drive. It is inserted in the ash pit and stays there, until you are filled with ash.   Rope CHAGIEV, student of the Read more…

If the Windows of your apartment face the street with heavy traffic, the silence in the house should not wait. Meanwhile to prevent in your home decibelle excessive noise anyone. To do this, cut another set of glasses for all frames of the Windows that face the street. Thoroughly wash the glass — and those Read more…

The cosmetic industry offers its products to increasingly beautiful and elegant plastic packaging, which after use sometimes simply a pity to throw away. That’s one of the tips of extending the life of your old bottle. Will neverlate for wirausaha part number hole Ø 8-10 mm to get the original pencil.

It is often necessary to pour a certain amount of fluid in a pan or bucket. Not to do it “by eye”, rather on the inner surface of dishes used to put a measuring scale, calibrated in litres. Depending on the material of the vessel, the risks can be incised or applied the paint counter.

In the processing of flat pieces cut from sheet materials: soft metal, plastic, plexiglass — sharp edges it is desirable to remove or to blunt (to make the chamfer). The simplest tool for this is easy to do from steel strips with a thickness of 2-3 mm. in the Middle of the short sides cut Read more…