The Rover, shown in the photo, the original was made in a caterpillar form, and then converted into a four-wheel drive wheel, which for many years is in operation. Each of the six wheels, the front pair of which is driven, has an independent suspension. Wheels — tyres low-pressure chambers wheels tractor truck with a longitudinal brace and the transverse belts of the conveyor belt.
Cab — metal, double tandem location of the driver and the passenger. The bottom of the cab — sealed, water-displacing, so that the Rover can overcome water obstacles. The engine 28 is strong, from a motorcycle “IZH-Jupiter” — a two-cylinder, two-stroke with a homemade forced air cooling. The maximum speed of the vehicle is 40 km/h.
A. ELISEEV, Krasnoslobodsk, Mordovia
Recommend to read
STOOL STEPLADDER
The proposed design (it can be called a two-storey stool, stool-ladder) is very practical, simple to manufacture and may find use in the summer house and in the apartment. Stool...
FROM ONE – BEDROOM!
Everyone would like to improve their living conditions. But for many, it unfortunately remains a distant dream. However, if you use a non-traditional solution, suggested by the Bulgarian...
