Strictly aged sharpening angle is an important element of any carpenter’s tool. However, to achieve this on the bar manually is not so easy, especially for pieces of iron of a plane. A good assistant will be… the plane. Pull out the blade tool on the entire length but so that the cut was horizontal, and firmly fix with the bolt or wedge in the pad plane. Put it under the cutter abrasive, and under the heel of the tool is the same thickness of a wooden block, and you can start sharpening. MARTYNOV, Novocheboksarsk
Recommend to read
THE PATCH ON THE CYLINDER
To mark the holes located at certain angles on cylindrical parts without special tool depot is quite complicated. To help out in this situation will a strip of adhesive plaster or tape,...
DRYING WATER…
In this issue we introduce young innovators, participants of operation "the Introduction" with an unusual method of drying developed in Nikolaev. At our request about it, say the authors...
