When you install the tent, her stretch marks are usually tied to trying to drive in the ground with wooden pegs or metal pins. However, gusts of wind, the pegs loosened and pulled out.
This does not happen, if the metal pin to turn into a kind of anchor by bending and sticking into the ground as shown in the figure.
Recommend to read
GLIDER, WHO BECAME A PLANE
Firm "Gather of waggonfabrik" (better known as just "goth") at the end of the 1930s, released the first batch of ten-seat amphibious gliders DFS 230 was developed in the German Institute...
SANI-MONALISA
The basis of design — fir or pine Board dimensions mm. 40Х300Х650 Even better to take a few boards with a thickness of 80 to 35 mm, pripojovat them to each other and glue put it on both...
