As proposed in the journal version of the work alone on the two-handed saw (with a rubber strap or tape) is not very suitable for winter, Thai rubber in the cold loses its elasticity. You can do without any additional equipment. Just need to move the handle to stick it in the tool holder, the saw is not on top, as usual, and the bottom. This will allow rabotatat tool like a hacksaw. And another tip. Shedding pine resin the saw easy to clean with ierosina, and when sawn larch logs, to avoid sticking possible, adding the propyl water. V. BUZIN, Prokopievsk, Kemerovo region.
Recommend to read
ROOM MODEL GLIDER ACCORDING TO THE “FRAME”
"Modelist-Konstruktor" has already talked about how scrap materials can make a simple room model glider. This required not so much - a thin wooden stick, foam sheet thickness of 3 mm,...
THE TAPE — SEWING MACHINE
Usually a polyethylene film for greenhouses connected by heating with a soldering iron or the edge of the iron. While we don't always get a strong and reliable connection, especially...
