COFFER ANGLER

THE CASE OF THE FISHERMANEquipped lover of winter fishing among other people, it is easy to distinguish by special box-seat, which many call a modern wardrobe trunk. Because angler-“podsednik” without a box, like a tourist without a backpack, like a mushroom without the boxfish as a hunter without yet feels. But because each of them seeks to acquire such equipment.
On sale, of course, has such specialized equipment, and a large assortment. But not everyone can afford to carve out of the family budget, in General, for my own pleasure and not for urgent needs money in the coffer. In addition, the lovers of fishing and professional fishermen, mostly superstitious people. They believe that only in a makeshift coffer can “live luck”, well, if not all, then, in any case, its a particle.
 
Meanwhile, to make himself so necessary, but simple tools even the novice Fisher teenage.
 
The main material of the case — duralumin sheet thickness of 1 mm. is made the whole body — wall and the bottom. In my version the bottom and side walls are made as one piece (but you can find them separately, but it is necessary to leave allowances for subsequent connections). The marking is made according to the drawing and cut the parts using hand snips. Bending of the workpiece and the recess in the vise, put on their sponge steel angles a length corresponding to the fold line. The next and most difficult operation for the manufacture of the box (at least for beginners homebrew) connection detail studs.
Then to the bottom of the box the edges are attached by rivets (countersunk heads on the outside) duralumin slider and the side walls of the lugs (in the local- Antaki) belt. The ears consist of ear-rings and a clamp. Earring made of steel wire 3 mm in diameter, and the clamp is of the same duralumin sheet, and wall.
 
Inside the box, at the discretion of the manufacturer, installed, and priklepyvayut to the front (front and rear) the sides and bottom of the wall, also carved from duralumin 1-mm sheet (this detail largely ensures the rigidity of the product). After that, it is advisable to blunt all sharp edges and rib details.
 
The lid (and seat) is first produced separately. It is based on a plywood sheet with a thickness of 10 mm. To the base is attached to the boss of the steel rivets with a diameter of 3 mm including washers and glue polyethylene foam strip, which is covered with a leatherette cover. The edges of the cover are stretched to the edges (ends) of the base and attached to it the wire brackets. Next to the long edge of the cover, on the opposite side of the boss, provorachivaetsya screws one of the bands rojalnye loops. The other prikladyvaya strip to the top edge of one face of the walls on the inside of the box. To the edge opposite the front wall middle hinged (free to rotate) is attached to the latch.
 
Dog cut out from a sheet of stainless steel with a thickness of 2 mm according to the drawing and bent in a vise at the bend lines. She is hooked over the bracket attached to the front wall.
 
Box Amateur winter fishing
Box Amateur winter fishing:
1—the obverse (front or rear) wall (made of anodized aluminum, sheet 1, 2); 2—dog (stainless steel, sheet s2 ); 3 — seat cover (leatherette); 4 — lateral wall (made of anodized aluminum, the sheet s1, 2); 5—baffle (dural sheet s1); 6—earring abalone (steel wire Ø 3,2 PCs); 7—clamp lug (dural sheet s1, 2); 8—belt (flat nylon tether); 9—carbine (from a bag); 10 aluminum rivet Ø 2,5 (according to need); 11—hinge (piano hinge); 12—the bottom (dural sheet s1); 13 — skid (plastic, sheet s10, 2); 14—boss (steel rivet Ø 8); 15 — washer (steel, 2 pieces); 16—seat base cover (plywood, sheet s10); 17 — soft padding (foam, sheet s10); 18—fastener coating (steel brace wire Ø 0,5, according to need); 19—reed (steel area 10x5x3).
 
Strap for box — flat nylon tether. One end is put into the ear and sealed with ribbon belt by a rivet. On the other end is similarly suspended from the clasp. It is desirable that the clasp was with the swivel and you won’t have any time to straighten the belt.
 
In the completion box and paint the only color you should not choose too bright — to the fish, not scare.
There is, of course, and other options of drawer design as well, and used to manufacture materials — a lot depends on the preferences and possibilities of homebrew. But a precondition has to be met: provision of light weight and sufficient rigidity of the box (adequacy thus depends on the weight of the angler).
Here is another variant of a box with sloping front walls and one side. And if the first option is the simplest and most common, the second, in my opinion, most durable, and it can be recommended to fishermen heavyweights. Seat he rigidly fastened to three walls (both front and one side), and the lid is separate and covers the chamfered portion of the box.
 
Reinforced box of the lover of winter fishing.
Reinforced box of the lover of winter fishing:
1 — front (front and back) wall (dural sheet s1, 2); 2—handle-dog (furniture); 3 — cover (leatherette); 4—clip (from a bag); 5 — a cover (dural sheet s1); 6—belt (flat nylon tether); 7 — low side wall (dural sheet s1); 8—high lateral wall (dural sheet s1); 9—earring abalone (steel wire Ø 3,5, 2); 10—the yoke eyelet (dural sheet s1, 2); 11 —hinge (piano hinge); 12 — skid (plastic, sheet s10, 2); 13—partition (dural sheet s1); 14—seat base (dural sheet s1); 15—soft padding (foam, sheet s10); 16—nylon mounting button (on demand).
 
The technology of manufacturing of a second embodiment of the drawer does not differ from that described above. Only here to the edges of the base seat bottom need to priklopiti corners, curved strip of the same 1-mm aluminum sheet, and the other regiments of corners — to the front walls of the box. Alternatively, you can make and also of 1 mm duralumin sheet, and lining and coating attached to the base with nylon buttons through the pre-drilled corresponding holes.
 
A. MATVEICHUK, Zavodoukovsk, Tyumen region.

Recommend to read

  • UNIVERSAL CARTUNIVERSAL CART
    Simple in design, it may be indispensable in the country due to the fact that will find application both in the home as a serving table on wheels, and on a plot in the garden or on the...
  • WITCHEDWITCHED
    Skis kept slipping off... Leaning on a stick, he made a hesitant step forward, but only tried to pull foot slipped, and I had to start all over again. I waved to him, and, intending to...