When the child grows out of cot, its mattress can be used for making original floor chairs without legs and frame, it meets the teenage spirit interior.
Chair-mattress is placed directly on the floor and your back rests on the wall, so it can be formed from one of the cushions without a rigid base, Its size will result in the following width — 600 mm, depth (to back) — 400 mm, the total thickness of the folded three-layered seat 300 mm backrest height (from seat) 300 mm.
The actual seat consists of three formed from the same mattress, pillow size 400×600 mm. the Back — also pillow dimensions 500×600 mm. the Thickness of all soft elements of a chair about 100 mm.
When transferring the mattress to the chair position Spinoza the pillow can also support wall further fixed in a vertical or inclined position by means of straps sewn to the lateral edges of the Straps fastened with buttons attached on the sides of the upper cushions, sewn, or held on the same Velcro-type “burdock”.
In the unfolded position, the mattress has a length of 1700 mm. to convert put from the chair back to bed, it is sufficient to unfasten both straps and, holding the front of the top cushion, pull it the rest filed behind her, like an accordion. The seat is expanded in one plane and Spinoza pillow falls back against the wall Folding chair occurs in reverse order.
The cushions for these chairs can be made separately from the foam of appropriate thickness (or stack of several thinner layers), and latex (the latter option will be more rigid and, thus, more sustainable in the position “chair”).
![Easy chair:](https://modelist-konstruktor.com/img/5894/1.jpg)
Armchair:
1 — back, 2 — strap 3 fabric strip”hinges” for connecting cushions, 4 — lower (when folding in the “chair”) pillow 5 average pillow; 6 — upper cushion-seat 7 — button (or Velcro-“thistles”).
A diagram of the folding of the cushions of the mattress in the position “chair.”
I. STAN, S. Prajila, Moldova