Pulverizer offered ruts, Duplenko from the city of Ekibastuz, intended for painting models. Its advantages — simplicity of manufacture, reliability, the absence in the design of scarce materials and components. The device is clear from the figure. The tank for paint — small cans, pump — improvised (but not excluded the possibility of using a Bicycle), tubes — copper or brass with internal Ø 1.5—2 mm. Method of joining parts of a spray — soldering.
Recommend to read
CONTACT — THE CONTACT!
Motorists know that if a car a long time not to use the battery terminals to prevent oxidation must be removed, and the open contact of the battery terminals to isolate. The easiest way...
CRAB: A COLLAPSIBLE BOAT
The proposed design is a four-section, three-man boat with load capacity of 320 kg In tourist trips she, being dragged to the Bank, turns in a fairly spacious "tent", especially if you...
