BETWEEN THE CEILING AND FLOOR

Every thing in the house requires a certain space. Updated your library, does kolichestvo aquariums — in any case before you arises the problem of their placement. To solve this problem will help steplag simple design. For its production you will need six water pipes and five or six boards (sheets of plywood or particle Board) with a minimum thickness of 20 mm. the Exact length of pipe and the dimensions of the shelves to stipulate does not make sense, because in each case their sizes will be determined by the height of the ceiling, the appointment of the rack, the size intended for his area.

 

At one end of each pipe tapped: it is necessary to use it to inflate between the floor and ceiling rack stand. Upper ends of pipes to put on rubber guard — you can buy them at the pharmacy: it is the tips of the canes. On the lower (threaded) end is screwed the water coupling with screwed in her segment of the same pipe. The latter also fits over the rubber tip.

 

The shelves are drilled in the prepared holes and the last hole Ø 5 mm led holders shelves. That’s all. We need to raise the rack and set it in place. To facilitate Assembly, drill through the coupling and the rack hole Ø 8 mm. This will allow you to do without gas keys: enough holes to insert two rods of appropriate diameter.

 

V. SERGEEV, Alma-ATA