Both designs are quite small locks. On their basis it is possible to create other systems, more sophisticated. The first castle shown in figure 1, suitable for flat products — folders, portfolios. The second covers boxes, boxes, boxes with small tool (Fig. 2).
The best material for castles — millimeter sheet of brass. Its thickness may vary depending on the size of the product. To cut the workpiece the whole jigsaw. Moreover, the sheet of brass in this case, you need to bond with plywood or plate and handle together. The jig saw will go smoothly — without jerks and jamming.
The dimensions of the locks are not indicated intentionally, they can be different. It is important to maintain the proportions of the parts of a particular design.
X. YURIEV, Lyudinovo
Recommend to read
TWO AS ONE
If you have a few small flat brushes, and painting works took fleyts, you can do it yourself. Take two flat brushes, and connect them firmly clamped between two plates of plywood and...
SCREWED… WITH A DRILL
When my dad collected a wardrobe, had to tighten a lot of screws. We remember posted in the "Modeller-designer", the Council is to use in such operations as rotation. But we had the...
