RAILS ON THE TABLE…

...THE RAILS ON THE TABLEFor model railroad two rail strips are made from sheet aluminum. They need to be screwed to a wooden block. They mounted on the side bars of wood that make up the profile of the mound. In the corners between the rails and the wooden blocks glued slats that allow you to save the profile rail. On top of the mound, stick the strap-sleepers. After assembling the pieces of wood with glue BF, sprinkle with a mixture of river fishing line and crushed slag. A thin layer of this mixture clinging to the tree, creates the semblance of a mound. The sizes are selected depending on the scale of the models.

 
...THE RAILS ON THE TABLE
 
1 — base 2, 6 — side bars, 3 — rails, 4—, 5 — sleepers.
 
A. INCIN

Recommend to read

  • INSTEAD OF DUCT TAPEINSTEAD OF DUCT TAPE
    I want to share with the readers of "M-K" a small trick that often helps me when it is urgent for insulating wires and electrical tape no. Done in this case so I cut a strip from the...
  • BELTS GLOVES FROMBELTS GLOVES FROM
    An open belt is rubber ring at the tape recorder or a player — it happens not so often, but because surprised. However, a good housewife can always find an old rubber glove. Select the...