For polishing articles made from metal it is best to use special toothpastes — Krokus, GOI. I want to offer recipes for their cook. The first will need the iron sulphate is white crystals after calcination it on a small fire turning into a fine brown powder. If one part mix with three parts of Read more…
Much easier to remove rust from any parts, if its surface is pre-treated with a special compound which is easy to make at home. To do this, simply chop the wax (i.e. candle) in a small container of kerosene so as to obtain a saturated solution. He insisted for about a week, and then moisten Read more…
The lightest three-layer plate with a honeycomb filler can be obtained, if you use this hint. The middle layer is empty matchboxes glued in a checkerboard pattern, for example, the sheet of hardboard and then covered with another sheet of paper, also greased with glue.
Typist reprinting the text follow the lines, moving the ruler. I propose to make a sloping stand of thin sheet steel to strengthen it from the clip folder and find a long longitudinal magnet. Clamp securely holds paper sheet, and the longitudinal magnet is a ruler, mark the desired line. To read the text with Read more…
Standing for a long time on a ladder, with rungs of circular section, is not very convenient. Therefore, in the “Arsenal” home of the wizard, it never hurts to here this degree area. It can be used for staircases with different step levels.
The driver of the car is protected from rain by the body of the rider in motion “will cover” a wide windscreen and flaps, the pedestrian will stay dry under the small umbrella. Only the rider gets from the storm in full measure: umbrella will not help him, and the usual cloak will not save Read more…
To restore the “hair” rassohnetsya brushes is possible, having moistened it with water and pulled from the handle with a rubber band. Excellent “curlers” are, in particular, of the nipple tube from Bicycle tires. In the same way, you can prepare the brush for storage. O. FIGHTERS, Vitebsk
For hammers and chisels, screwdrivers and pliers — for the different instruments invented different ways of suspension and mounting of tool boards in the workshop or home work area. But with drill, the situation is more complicated: very “difficult” she has a case shape. However, there are quite affordable and convenient way. The drill is Read more…
Suddenly hit a thaw after a frost can cause a lot of trouble. On the sidewalks and the streets turned into a real ice rink, go is not easy, especially for the elderly. But ice is not terrible, if in advance to stock up on dry sand and a water-resistant glue such as “Phoenix”, “Point-1” Read more…
To permit sheet metal, need metal shears and a line with the Scriber for drawing cut lines. And if you can see the curved workpiece? Use the bolt or stud of suitable length, as shown in the figure, the nut will trace the edge, and the end of the stud resting in a scissors — Read more…
