Advice

With this simple device you can make a plastic bag of any size. The technology is very simple: between two of the straps are clamped by the two segments of the film so that the region made in strips about 1 mm. Podpravit them throughout the length of a match and will get smooth and Read more…

Many items of furniture, housings of radio equipment, various devices are connected on cylindrical spikes Ø 6-8 mm of hardwood (usually oak or letters). Make them the traditional way, obstruguy sticks to a circular cross-section — time-consuming. Prepare some small strips of square cross section with sides approximately equal to the diameter of future spikes. Read more…

Carpal rubber expander value of 23 penny perfectly seals the junction of the plastic trap under the sink basin with the drain sewer pipe in the bathroom. The connection is very accurate, do not let any water, no odors. You may not even need such an operation, as smearing the joint with cement mortar. Enough Read more…

Even with a good glass cutter is not always exactly separated cut piece of glass. However, if along the barely noticeable risks left by the carbide roller tool to make the tape wet paper — the traditional tapping on the glass it will fall strictly on the cut line.

When disassembling the boxes and shields cements their nails without the work gently unfold to use again. This will require a simple device — a metal finger Ø 10-15 mm with an internal hole whose diameter must be larger than the nail, and the depth is less than the length of its curved portion of Read more…

This upgraded wrench I use for many years and I think it is very convenient. Drill a hole and his lips pressed to two steel pins, I was a versatile tool to unscrew and also hidden castle nuts of various sizes.   V. MANDZUK

Sewing needles save usually stuck in the pads. The same principle can be stored and some carpentry and locksmith tools. Just “pad” for them should not be made of cloth and wool, and metal mesh, the cells of which serve as sockets for chisels, awls, screwdrivers, etc.

To lock in the Assembly of the timber frame elements at a certain angle, usually used bolts or studs. For strength additionally use glue, nails, communication “vpoldereva”. Not less strong, however, get a connection using such a “toothed” washers. The advantage of a significant: parse such a mount is only a few minutes.