Now available is a vast assortment of various acoustic computer systems — almost every company that produces computer hardware, supplies the market and the corresponding acoustics. The consumer only has to choose the right system, based on the ratio “price — quality”. But not everyone can afford the “cool” equipment, and at the same time, I feel that the sound was not worse. Well, for homebrew, even a novice, this problem is quite solvable: sound active inexpensive computer speaker systems can be improved independently. For illustration, the author offers a description of the modernization quite common columns SVEN (model SPS-828) made in China.
To reduce vibrations, eliminate noises and rattles, the side wall of the subwoofer inside was laminated foam 10 mm thick, plastic tube of the phase inverter is wound on the PVA glue several layers of paper, and some details of the motherboard built-in amp fixed with the help of glue “Moment”. The inner surface of the casings of the satellites were also covered with foam. To reduce distortion of the audio signal, too thin wires connecting the satellites with the subwoofer, and are provided with plugs mini-Jack, replaced speaker cable ballscrew-M 2×0,75 mm2, and instead of two output receptacles are used clips for the speaker (4 pins).
Schema active acoustic system SVEN (model SPS-828) with two satellites and subwoofer:
1 — subwoofer. 2 — satellites 3 — connectors, 4 — forestay built amp, 5 — wire connection
According to radio Amateurs who have experience configuring equipment for home music listening, the sound of the audio after the listed improvements is clean and rich, and its construction — reliable.
The proposed measures can be used for other AC.
Alexander TIKHONOV, head of the society of experimental design. syut, Kostroma
Recommend to read
THYRISTOR VOLTAGE REGULATOR
My thyristor voltage regulator (THREE) is easy in manufacture and adjustment, linearity regulation and high power output — 200 watts without heatsink and 1000 watt radiator cooling area...
TAPS — ON DOWEL!
The heel of any Shoe wears out the fastest. To replace the erased printing is a snap. Especially if the body of the heel solid. Then a piece of corrugated rubber, you can just stick a...
