Advice

Camping or at the cottage is easy to make in just a minute original and comfortable, and most importantly—reliable in terms of universal fire candlestick. This will require a tin can and scissors: they incision the soft part of the plate and is bent in the form as shown in the figure.

Everyone who had to drill holes in the pipes or other parts of circular cross-section, knows that this is a difficult task. The drill bit often slips with printed core labels, and the holes are not strictly diametrically. However, to facilitate this work and to improve the quality of the holes, a special conductor is Read more…

Of tubes of different diameter, tightly placed one on another, you can build a jig for drilling end holes in cylindrical rods of various cross sections. For the outer bushings are better to use a steel tube with a thickness of 0.5 mm, and the inner insert can be bent any sheet metal.   V. Read more…

If you have a few small flat brushes, and painting works took fleyts, you can do it yourself. Take two flat brushes, and connect them firmly clamped between two plates of plywood and knocking small nails.

When nastilanie of the sexes the hardest thing is to lay the last Board — not so easy to “drive” it in the remaining slot. Moreover, the width of the gap sometimes lack some few millimeters. How to move the already laid boards, especially if you hit them with a hammer prevents the wall? In Read more…

Not so easy to prepare items large drachevym file. Most often, the difficulty lies in the fact that such a large tool is uncomfortable to hold only right hand and only press the top left — need a second handle. Hastily it is possible to make a standard clamp, if you secure it to the Read more…

Painters love to tell stories about the master, who, fascinated by the coloring of the floor along the walls, not noticed as it stained everything around him and was unpainted on a small island in the middle of the room. But when laying tiles it is better to start with the middle of the room, Read more…