Starting a towing device (Fig. 1) easy to produce in any model circle. In the absence of a lathe it can be made flat, which, however, some will increase size, but will not affect performance.
TOWED MACHINE
Advice
REANIMATION INKJET CARTRIDGES CANON
Inkjet Canon cartridges have a nasty “feature” suddenly refuse to work. To get them back to work will help the liquid to soften hands, which is freely sold in pharmacies.Shovel of vcsel
If the hand is a metal sheet or scrap plywood, enter them between the fork tines – get a good shovel.
CURLING WALL SCONCE
The shades for the chandeliers or lamps are so narrow that screw in a light bulb, and if necessary, remove the ceiling — the hand crawls inside to remove the plastic retaining nut cover. Make it allows… wooden Laundry tongs, as shown in the figure.
“LAMB”? THERE IS NOTHING EASIER!
Quick coupling by means of a bolt and wing nut is highly popular among the homebrew. Unfortunately, you can buy nuts anywhere. We offer you a “lamb” simplified design is for everyone. This will require a steel or dural profile”area”. The width and the thickness of its shelves are selected depending on the diameter of Read more…
HELP WASHER
Undoubtedly, the plastic siphon for washbasin much better than cast iron. But the trouble is that they are not interchangeable. Throwing worn-out iron and putting plastic, we have something to fill the annular gap, as each of the pipe under the old syphon has an internal Ø 72 mm, and outer diameter of plastic pipe Read more…
THE OWNER WILL HELP… FOOT
Driving in the ground stake (for example, for the fence), usually using sledgehammers. But it’s okay if the count is not above your height. Otherwise have to fence any stand, install the ladder. If you have nothing at hand to help out here is a simple fixture: coke strapped to the wooden wedge. Here the Read more…
HOMEMADE ANVIL
…is necessary for anyone who makes anything out of metal. But where to take it? Turns out it can be made from a piece of old rail. It is enough to cut autogenous cutting unwanted parts, adding the procurement of the required form, and get to work.
SECOND COUNTS… “MOUSE”
Currently available a variety of models of wall elektromekhanicheski quartz watches with stepper motor. They are, as a rule, uses unpackaged integrated circuit — the oscillator/divider with an external quartz resonator coated with black compound. And had to happen that this e-node has failed in the clock, served me faithfully for years.HANDLE-CAPACITOR
From used electrolytic capacitor K50-6 you can make the switch knob for the radio. It is necessary to free the glass of the capacitor from the electrolyte, but instead pour epoxy glue. After the glue is slightly hardened, it is pressed greased with vaseline the axis of the pen device — up to complete curing. Read more…
