Often aluminum wire suddenly breaks off, so even in the most remote places, leaving a short tail, what about twisting can not be considered. In these cases, rescue is simple, but effective way. You need the same wire is wound on a nail, whose diameter is slightly smaller than that of the chip, a few turns. Then, the resulting spiral is screwed onto the broken off ends of wires: the connection is secure even will serve.
Recommend to read
ANTI-THEFT – IN 5 MINUTES
After reading No. 1 "M-K" for the year 1989 description electronic switch-off "weight" of the car, decided to use it as a simple anti-theft tool. However, the replacement of toggle on...
DRYING… MAGNET
In the last issue, we reported on the unusual at first glance, the method of drying wood in the bath water, between the electrodes, the supplied current of industrial frequency. This...
