Original car loader, which is designed by the young technician Alexander kobzevym at Voronezh oblsud, we offer the readers. At the VII regional scientific-technical conference of pioneers on the modeling of agricultural machinery, this work was awarded the first prize and aroused great interest not only among visitors of the exhibition of children’s technical creativity, but also with experts.
This will be possible thanks to the proposed new Transporter, which will allow the boot of the car, using its same engine. Such shumopogloschenie can be used in all sectors of the economy, where for the transport of goods used cars. It is particularly essential in agriculture, where in the field it difficult to use other equipment.
Car samoborski is a lifting conveyor belt with buckets, which, through a system of reducers, coupling, joints and the telescopic shaft is connected to the engine loaded machine. To do this, the motor car is required to lengthen the shaft with a ratchet, put it on the bumper and fasten to the rack bearing which is closed with a screw cap.
Samopoczucia can be submitted in the body cabbage, beets, carrots, potatoes, gravel, sand, clay, and sacks of flour, sugar, cereal, fertilizers, cement. It is designed for loads weighing up to 50-70 lbs.
Samoborski in the working position.
What are the advantages of this samopoczucia compared to the existing ones?
First, as already mentioned, it runs off the engine itself as the load of the machine. On the loading eliminated the heavy manual labor, many times reduces the time of work.
Secondly, there is the possibility to lift loads to great heights. This is an important factor in the transport of vegetables (potatoes, cabbage, beets, carrots, etc.), since it is possible in 1,5—2 times increase the capacity of each car by building the sides of the body.
Thirdly, the actual truck, no engine, simple and cheap to manufacture, and reliable in operation; it is easily transported to any machine.
The conveyor quickly docked with the car. To do this, the machine will need just a small addition: it is necessary to lengthen the shaft with the ratchet, which is normally used by the driver to rotate the crankshaft manually with a crank. An elongated shaft is shown on the bumper and is mounted on a sturdy stand with bearing. He will now perform a dual function: the former, for manual start, and the new — as the PTO shaft of the engine.
Car tampographic:
1 — ratchet car, 2 — ratchet conveyor, 3, 5 — hinges, 4 PTO shaft, 6 — clutch, 7 — reducer, 8 — shaft driving drum, 9 — leading drum, 10 loader, 11 — conveyor belt, 12 — rollers, 13 — buckets for shipping, 14 — side panel.
Transportation of samopoczucia.
The kinematics of samopoczucia clear from the figure given here. At the disconnected coupling to the ratchet shaft of the engine connected shaft samopoczucia with reducer, which gives the opportunity at a medium speed motor trucks Ocala 2000 rpm the drum conveyor to make 10 Rev/min.
On rough surface the difference of level of wheels of a car and wheels samopoczucia filled joints and telescopic shaft.
Recommend to read
TANK, WHO MET IN WAR
The first meeting of these armored vehicles occurred in rebel Spain in 1936 to September this year, arrived at 41 German tank Pz-1. After a month on the boat "Komsomolets" was delivered...
WEDGE — GUARANTEED
The easiest and most common method of fastening a wooden handle in the head any hand tool — a wedge. Over time, however, and such fastening is weakened, shaken. To avoid this, I propose...
