Sharpen the saw — a simple matter, but it has the potential to injure your fingers on the sharp teeth. Use a cut rubber hose. It is sufficient to cut: it up and push on the part of the saw blade under the restraint of the hand and fingers are intact!
LUBOVSKY O., Gorny, Sakhalin region.
Recommend to read
The an-70
The development of military transport aircraft (MTC) An-70 intended to replace the An-12, began in 1986 After seven years of tactical and technical requirements specified, wherein, based...
SPEEDWAY IN THE GYM
For the manufacture of tracks required plywood thickness of 10 mm, and it is important that it was dry, smooth, uniform thickness and without lagging layers. Each sheet should have the...
