When working with imitation leather or thin skin, which are often used for the models or devices, there is a need in the holes of small diameters. In these cases, rescue of a homemade tubular proboinitsa. This can be obtained for example from a metal rod of a ballpoint pen after extraction of the writing unit and sharpening the edge of the tube.
Recommend to read
MIG-3: THE FLYING CIRCUIT
Kordovye contour-models have always been attracted to model airplanes. To create them, unlike the full copies, takes less time, and aircraft modeling experience needed for this not so...
TUBE — OUTSIDE
Once I took off the rubber hose and clamp under the right hand was not. Then I picked up steel ring of internal diameter slightly greater than the diameter of the hose, and cut a wooden...
