MINI-PRESS

MINI-PRESSWhen gluing the components usually have to be tightly pressed against each other for a long time. To apply for this clamp is not always convenient, especially when glued with thick objects. So I made here a mini-press. And it serves me for many years.

 
Mini-press: 1 — bottom plate (channel 50), 2 — bolt chain 3 — chain. 4 — eye (or hook), 5 — nut, 6 — clamping the screw.

 
As its main element — clamping screw — used plumbing valve with valve and shank at the wrench. The length of each segment krupasindhu chain a little more turn of the screw. Eyelets for attaching chains welded, although instead you can use regular bolts, passing them through both shelves steel channel clamp bar. Better yet, fit the hooks that you can use to enhance any chain link, then no need in a large course screws.
 
V. BOLDUEV, Fergana

Recommend to read

  • IN FLIGHT — “MAPLE-7”IN FLIGHT — “MAPLE-7”
    Simple radio-controlled model aircraft. Do note that this article is designed for those who prefer to build RC models are not alone, and together with two or three associates. For such a...
  • THE BED-VALANCETHE BED-VALANCE
    This ornamentation on almost every bed, but also will create comfort in the room, and so sleeping under the canopy - more and more quiet, since summer will protect from annoying insects...