When working with wood one of the main tools are chisels or chisels. Their sharpening depends on the quality of the product. As a rule, a similar tool to sharpen the entire surface of the cutting part. And when the blunt chisel will have to re-process the whole tip on the machine.
Offers little to reduce the working area of the tool, sharpened it as shown in the figure. Efficiency will not decrease, but the time on “edit” will take significantly less.
BOLCKOW V., carpenter, S. Kunai Kurgan.
Recommend to read
The AIRBOAT
A little patience, a little care and you'll make a great airboat, which will obediently follow your commands on the water. In order to build it, you will need: a piece of plywood with a...
TRACTOR-TRUCK
The hinged trailer was manufactured and installed on the tractor MTZ-5 (Fig. 1). Figure 2 shows a diagram of the tipper Assembly. Its main parts: a support frame body, weld metal landing...
