When disassembling the boxes and shields cements their nails without the work gently unfold to use again. This will require a simple device — a metal finger Ø 10-15 mm with an internal hole whose diameter must be larger than the nail, and the depth is less than the length of its curved portion of the Edge of the hole from the inside worn down to nothing: so it will be easier to hook them bent nail to straighten it. The end of the nail will abut the bottom of the hole. Now just one blow of the hammer device so that the nail head come out of the wood and the nail puller. A. SVETLOV, Chernigov
Recommend to read
FOR WELDING, START-UP AND CHARGING
For more than ten years, using a homemade device proved during welding, cutting metal sheets with thickness from 0.6 to 12 mm, the power at the time of starting the engine of a motor...
THE TRAY UNDER THE HAMMER
If you want to transfer a set of tools to the job site or just keep them at the ready is essential for this will be an easy plastic tray. These are found in hardware stores, but can be...
