To make required urgently a small spring — not a problem, if there is at hand a suitable steel wire. You can just use a vise and a rod of any desired diameter. The last will only need to drill blind or through hole for entry of the wire end, with the subsequent winding of the coil to a coil.
Recommend to read
NOT FROM THE COLD
Truck drivers all over the world like to wrap the "wheel" wheel with a plastic cord or a plastic tube: rough, but it is believed that beautiful and practical hands do not slip. Owners...
FORCING THE “D”
Device for Dismounting of bearings is shown in figure 13. They are as follows: from the bearing, remove the separator, pushing the balls enter between the collars of the bearing lugs is...
