SANDING PAD

SANDING PADWhen grinding surfaces usually use bars wrapped around or nailed sandpaper. It is impractical, often have to throw away the pieces with a wide, completely untouched edges. We offer sanding pad consists of two parts: head with studs-studs and template with the response holes. Spikes — regular nails Ø 5-6 mm.

To work cut a strip of sandpaper with a length equal to the perimeter of the bottom of pads plus 10-15 mm for gluing. Then she put on a template and fixed, joining two parts. When the sanding paper on the working surface of the pads unusable, the template separates, turn “up” and re-clamp it.
Economical sanding pad (the right — shaped pattern).
Economical sanding pad (the right — shaped templates):
1 — head pads, 2 — thorn 3 — the return hole in the template, 4 — abrasive paper, 5 — template 6 — seam gluing.
 
The bottom of pad can be given any shape depending on the configuration of the treated surface.
 
P. MIKHAILOV, Bendery, Moldavian SSR

Recommend to read

  • BTR “SPROUT” WHEEL, FLOATINGBTR “SPROUT” WHEEL, FLOATING
    Emerging in recent local military conflicts have shown the necessity of creation and adoption of the armies of new models of armored vehicles, highly maneuverable and at the same time...
  • IT ALL STARTED WITH GLIDERIT ALL STARTED WITH GLIDER
    In 1921 pyatnadcatiletnij student Alexander Yakovlev read a book on the history of technology. In one of the chapters talked about the emergence of aviation, there was a model...