Usually a heavy box, container or pallet with a load attaching to a lifting mechanism using four ropes-slings; lumber, pipe of large diameter it is possible to raise two. If you overwhelm sling loop-the loop, the normal load will rise and it one. Well, if you want to move, say, heavy sheet metal?
On the Leningrad car-building factory of a name of I. E. Egorov, in this case, do just one sling. This became possible thanks to hung on it simple to capture, developed by factory innovators. It is a team of the bracket, in the “beak” which has a toothed eccentric. When the lower sheet through the clamp eccentric “recessed”, and the sheet is free to slip inside. But at the slightest attempt of a reverse movement he “sakasavesa” eccentric in its beak bracket and is held securely therein. Locking device prevent accidental opening of the grip and improves safety.
Clip capture:
1 — eyelet for wire rope, 2 — body, 3 — a fixed jaw, 4 — leaf, 5 — eccentric clamp.
When your own size 60X120X320 mm gripper capable of holding a weight of up to 200 kg. Its use for easy transporting of sheet steel in industrial conditions and doubles productivity.
Recommend to read
DRILL — TOOL… CHEF
Many Housewives have in their Arsenal an eggbeater manual ST-2, which can be easily converted into a mixer. It is enough to remove the handle, and the protruding axis to clamp to an...
SPROCKET FOR CHAIN TRANSMISSION
the Designers often have to choose the right transmission ratio, and in this regard to look for suitable veins. The case is ungrateful, requiring large expenditures of time. It is much...
