Simple and beautiful ball-point pen can be manufactured in a few minutes, if there is a rod with pasta and… a colourful illustration from a magazine or just a sheet of paper. For this purpose the attached drawing is cut out of the billet that the part A is screwed onto the rod. A large part of the workpiece (dashed line) are pre-lubricated with glue AK-20, BF or white synthetic, giving a flexible joint.
Then the handle allow to dry and then sanded it with fine sandpaper. It now remains to apply two or three coats of varnish, and the white case to cover nitro, choosing an interesting color scheme.
The pen is ready. Can also buy a 3d pen, if you do not like ball. Simple and beautiful ball-point pen can be manufactured in a few minutes, if there is a rod with pasta and… a colourful illustration from a magazine or just a sheet of paper. For this purpose the attached drawing is cut out of the billet that the part A is screwed onto the rod. A large part of the workpiece (dashed line) are pre-lubricated with glue AK-20, BF or white synthetic, giving a flexible joint.
Then the handle allow to dry and then sanded it with fine sandpaper. It now remains to apply two or three coats of varnish, and the white case to cover nitro, choosing an interesting color scheme.
Simple and beautiful ball-point pen can be manufactured in a few minutes, if there is a rod with pasta and… a colourful illustration from a magazine or just a sheet of paper. For this purpose the attached drawing is cut out of the billet that the part A is screwed onto the rod. A large part of the workpiece (dashed line) are pre-lubricated with glue AK-20, BF or white synthetic, giving a flexible joint.
V. URANIUM
Recommend to read
DIGGING WITHOUT LOSS
The design, which will be discussed, could be called a potato harvester as it consists of several relatively independent units. The potato is intended to be coupled primarily with a...
DEEP METAL DETECTOR
In the journal "modelist-Konstruktor" No. 3 for 2006 C. A. Kotov shared with the readers the experience in the manufacture in a home workshop metal using scrap materials, in particular,...
