Ulyanovsk automobile plant has started to update the model range of cars produced in the First stage of this event was the release of the car UAZ HUNTER (“Hunter”) is an honored veteran of the UAZ-3151 is better known under the name of UAZ-469.
The mass of the aircraft during the great Patriotic war. About this attack was described in a “M-K” № 8 in the article “Tanks are attacking from the sky…”. There is printed and his drawings. In this issue of the magazine we finish the publication.
Designing patterns, usually always takes place in several stages. It is almost impossible to make a decent model, once having passed a way from calculation and drawing to stitched wing Mylar film. Typically, this is only the first step in creating the model. The following will be the flyby of the model and its numerous improvements. And only when to improve the model through modifications, it will be impossible, on paper, a second version of the model, which absorbed all the best from the first and supplemented by all those. it was impossible to implement in the first version, with improvements. This is followed by overflights and…
He was born and I grew up in that land of mother Russia, where the land most of the year is under a thick cover of snow, a reason those places is considered the birthplace of Santa Claus. Perhaps that is why along with General interest in engineering of particular interest to me has always evoked the snowmobile machine. To have such was my childhood dream come true. When I grew up and learned to do many things with their hands, decided to make its design. By the time I’ve not only studied the device snowmobile vehicles, but was able to critically evaluate the advantages and disadvantages of this technique.
In the late 1960-ies started to combat service in the Mediterranean and in the Atlantic, the new classes of ships of the Soviet Navy — anti-submarine cruiser “Moskva” and “Leningrad”. To enhance the combat effectiveness of the ASW anti-submarine cruisers carried on Board each 14 helicopters Ka-25ПЛ and Ka-25PS.
Check if we have enough skill to quietly steal up to the owl. This attraction is very easy to do, and a young handyman and his friends it will take many minutes. Let’s start with the stand 1. It should be cut out of the Board thickness of 25 mm on the dimensions shown in the drawing. The 2 bottom corners nailed or glued to the bottom of the device to enhance the battery 3336.
Great interest among specialists of national economy and young workers caused held at the VDNKH all-Union review of achievements locksmiths innovators. This eloquent entry in the guestbook of the show. “Note the great practical value is shown innovative proposals locksmiths, and especially to reduce manual labor, increase productivity and improve working conditions”.
Imagine: around the entrance waiting for us miniature car a nice modern shape. Let’s do a small trip. The door swings open, as usual, and gently rolled back, releasing a wide opening for planting. Installed on hinges of the seat POPs out, we get them directly from the pavement, and they can easily occupy the same position.
“Candle” — light bulb with a power of 50-60 watts. “Pistol” — a tube-tube in which is placed the photodiode, and the handle with the trigger button. The photodiode and the lamp are connected through the electronic circuit.
Any gardener or grower is usually a considerable Arsenal of all kinds of tool storage most often develops somewhere in the corner. Shown in figure wall hanger, made with his own hands from scrap materials, once and for all eliminates this problem.
