Start with a careful study of the drawing and then get to work. As the present motor vessel, the vessel is stacked On a smooth plywood, 3 mm thick, transfer the exact dimensions of the deck and frames using carbon paper or tracing paper. Remember that on the deck of the elephant of plywood will be parallel to the axis, and the ribs vertically.MOTOR BOAT — WITH YOUR STOCKS
Start with a careful study of the drawing and then get to work. As the present motor vessel, the vessel is stacked On a smooth plywood, 3 mm thick, transfer the exact dimensions of the deck and frames using carbon paper or tracing paper. Remember that on the deck of the elephant of plywood will be parallel to the axis, and the ribs vertically.
The model of modern missile boats (Fig. 1), developed by the Central marine club DOSAAF intended for competitions.
For bending metal rods and pipes there are many ways and devices. Most often this operation is performed on the bending. But not everyone (even of the workman person) he has. The easiest method is when one end of the workpiece is securely fixed in a suitable place (e.g. in a vise), and holding the other bend If bend the end of the short, he put on a corresponding segment of the pipe, using it as a grip and lever. But this method does not provide either the quality or the accuracy of the bend radius.
When I see the graceful and beautiful thing, there is an overwhelming desire to do the same Start thinking how to make it easier so I made the column rack for flowers, only four parts And what came out of it, seen in pictures and drawings. I’ll tell you more as to get a rack of accessible materials. I myself first of all, in order not to complicate the work, bought a thin baluster ends of square section with dimensions of 40×40 mm (better to grind it yourself still failed) And the round countertop cut himself, with a diameter of 380 mm, thickness — 30 mm.
Dear editors! Send a description of simple tools that may be needed in the manufacture of furniture Think it will appeal to many I have it used successfully for years.
In the early 30-ies of the radio Amateurs of the Soviet Union, mastering of ultrashort waves, for the first time faced the necessity of direction finding of radio transmitters. The experiment was sometimes transformed into an exciting searching game, which gradually take the form of sporting events. In the late 30-ies of the radio orienteering sport is called “foxhunting”. The essence of this new sport was to locate on the ground three to five hidden transmitters with receivers-direction finders. The first transmitter / receiver equipment for “Hunting for foxes” operated in the range of 38 MHz.