My tools are designed for processing of soil in the garden and the vegetable garden. The main type of work in the spring and summer — preparation of beds for planting and care of plants. Therefore, more than a third of the set are rippers. They are divided into three types: one-, two – and trehrozhkovye, and each is used depending on the planting density and the soil conditions. Where gaps between plants are great, easy to work trehrozhkovye — they are the most productive; and where planting is thickened, handy slowly loosen the ground two or odnokrylym.DREAM GARDENER
My tools are designed for processing of soil in the garden and the vegetable garden. The main type of work in the spring and summer — preparation of beds for planting and care of plants. Therefore, more than a third of the set are rippers. They are divided into three types: one-, two – and trehrozhkovye, and each is used depending on the planting density and the soil conditions. Where gaps between plants are great, easy to work trehrozhkovye — they are the most productive; and where planting is thickened, handy slowly loosen the ground two or odnokrylym.
Build model rockets. The first manned flight into space, our compatriot Yuri Gagarin in 1961 was the beginning of a new the directions of technical creativity — rocket-and-space modeling. And from the first steps of this interesting kind of design magazine “modelist-Konstruktor” became its active promoter and popularizer. And loyal to him until now.
In the soul of every boy living Navigator, so any rain brook — is a river, and a large puddle is a sea calling out to let the boats from the simplest of chips or a sheet of paper, to specially planed, and the more such combined, as proposed by the German magazine “Technium” self-propelled model of a boat. Yes, no ordinary boat, but an old, two-pipe, with paddle wheels at the sides. What child would not want to build like this, especially because the design is quite affordable for independent playback.
Australian Steve Sammartino (Steve Sammartino) and Raul Romanians Aida (Raul Oaida) presented the car on the pneumatic actuator, assembled from parts designer LEGO. The car accommodates two adults and is able to accelerate to 32 km per hour. The construction of the car took half a million of parts of LEGO. From the designer collected all the parts of the machine, including four runs on compressed air piston engine. The only elements ostavlennye not LEGO are the wheels, tires and instruments on the panel of the driver.
They are large and small, foldable and “monolithic”, table and floor — the different designs, but with one common shortcoming: require space for storage. We are talking about Ironing boards. Indeed, so necessary for each family household goods, and such an archaic, “clumsy”! where to clean it up when all the sheets are in order? However, came to light and the modern Ironing devices going, so to speak, in pace with the times scientific and technological progress: electric units in which instead of heating the iron bar, and the role the Board performs a cylindrical roller. But this construction is even more difficult to attach in the apartment so that it had not violated the interior.
Present Board milling machine come in handy craftsmen who love to work with wood to get the blanks embossed surfaces, various geometric patterns, as well as cutting slots, grooves, sockets (both simple and shaped), etc. the Machine consists of two main parts: a base attached to it the guide posts and spring-loaded platform on which is mounted an electric motor.
Wheeled Buer, beach sailing, sand yacht, metromobile… All these terms refer to the same Tina of vehicles using the movement force of the wind. Designs of such “petroholod” — a great many, from year to year are added up — three wheels and four, with Latin sail and with the Bermuda arms, hard planes, reminiscent of an aircraft wing, and even with a horizontally positioned fan-like impeller anemometer.
Well-made screw — the key to a successful flight “butterflies”. Pick up the wood, without the ROE and knots. Billet screw vystrugat in the form of a rectangular bar size 160х8х10 mm. In the center of the puncture hole for the axis. Then make a paper template of one of the propeller blades. Aligning the centers of the template and of the bar, move the contours of the blade first on one half of the bar, and then another. Billet astrogate a knife strictly on the contour, do the same with a lateral projection. Holding the billet in his left hand, on the opposite half cut the right corners. When finishing, try to front (top) part of the blade was slightly convex and the lower flat or even slightly concave.