Advice

I saw in the hospital, as the nurse deftly fastened on me the bandage from the bandage: as usual, tying the cut end of the tape, and using some staples. Considered and marveled at the simplicity and wit of its devices. And when the house had long to use elastic bandage — remembered a paperclip Read more…

The wires of electrical appliances, having a large length, it is easier to keep folded in a coil. And to lock them in this position, you can make a special clamp. For example, from strips of fabric, one end of which is sewn a button, and the other has under it a number of holes. Read more…

Folding wire extension can peretiraetsya on the bends. To avoid this, you should wrap several layers of insulating PVC tape, slide a section of PVC conduit or rubber hose of suitable diameter. Secured so the cable will last a very long time.

For repair and colouring of roofs from metal, there is a need in the fixture to hold the tool on the roof slope. Help out a simple shelf with wooden bars with magnets on the bottom of the frame. If necessary, the venue under the tool can have a shoulder on the fence.   Needles Read more…

All flashlights have a reflector giving a wide enough beam of light. But if you want a point — for example, the light pointer of the lecturer? Narrow beam, as if from hidden lamps in detective films, will Give a simple nozzle. For its production will need a plastic Cup suitable diameter and lens from Read more…

Keeps my hand covered with corns during garden work with a rake or a shovel, some choose to wear gloves. But on a hot summer day it is hot, hands sweating. But such ring fabric lining will protect the palm no worse than gloves, and to work with her more comfortable hand ventilated.

…make a surface gauge. In the block of hard wood drilled a hole in which is screwed into the screw. Use a screwdriver to set the distance required for the application of risks.   V. MERDIS, Moscow

Using just two wooden bars, metal bars, vise and elastic steel wire, we can quickly produce the spring. Its length depends on the number of turns around the rod, operated by a bunch of wooden beams, between which is passed the free end of the wire.