FOLDING BBQ

Categories Country house

FOLDABLE GRILLLovers to relax on weekends outdoors or on the country becoming every year more and more. Witness the sad-looking scraps of the scorched earth of a recent fire where tourists or vacationers baked potatoes or fried skewers. Braziers are available now on sale, are not all, as they are heavy, bulky and relatively expensive.

 

We offer foldable BBQ easy to do yourself. For this you need to purchase sheet steel (roofing) thickness from 0.8 to 1.5 mm — for the manufacture of the walls and the bottom of the grill, a steel rod (preferably with a diameter of 5 mm) for legs and, finally, the four nuts M5. Weighs camping “stove” made of these materials, only 2-2,5 kg. It is more convenient and more compact grills available on the market.
 
Folding mini grill
 
Folding mini grill:
 
1 — side panel (2 PCs), 2 — the end wall (2 PCs.), 3 — bottom (2 PCs), 4 — leg (4 PCs) 5 — M5 nut (4 PCs)
 
Drill bit, sharpened by the pen
 
Drill, sharpened pen
 
The procedure for manufacturing this portable hearth following:
  1. From steel sheet to cut the workpiece according to the dimensions given in the drawings.
  2. The obtained patterns of the hamstring and in the same places bend.
  3. Drill holes for mounting and ventilation (drill it is better to sharpen the “pen” as shown in this case, the drill bit does not vibrate and the opening is neat).
  4. Separated from the rod with a diameter of 5 mm four blanks for the legs of the grill, and bend them on both sides with one end cut thread M5.
Going foldable grill in the following order of side and end sheets are aligned at an angle of 90° to each other so that the mounting holes coincide. Then the stem is threaded in both the matched holes and zavertyvanija nut. Similarly, going the other (side and end) leaves. Next, stack the two halves of the bottom so that their ribs were in the middle of the grill and facing down Camping oven is ready.
 
C. TRACTORS

Recommend to read

  • CRAWLERCRAWLER
    This track snowmobile a little familiar to our readers. His picture was published in No. 3 of’99 our magazine under the category "Panorama photos of readers 'letters". Made it Valery...
  • DISPENSER FOR EPOXY RESINDISPENSER FOR EPOXY RESIN
    Epoxy adhesive, as is known, consists of two components: resin and hardener. Before use, the components are mixed in the ratio of 8 : 1 (by volume). It's easy, especially when the...