Hams know how sometimes when soldering they do not have a third hand to fix a small detail. At the time it was proposed many devices that can help in such a situation (see, for example, the magazine “modelist-Konstruktor” No. 10’1996). In particular, I use a fixture, which is made in just a few seconds.

This is an ordinary forceps, which fits a wide nut. By advancing the nut to the middle of the tweezers can compress his lips and lock detail. The faces on the nut allow you to put the tweezers with the part on the table at a convenient angle for soldering.
V. ILYUKEVICH, Grodno, Republic of Belarus

Noticed mistape? Highlight it and press Ctrl+Enter, to inform us.

Recommend to read

    When welding T-joints of pipes pre-combining them is difficult. Made a fixture consisting of two metal plates, studs, and two nuts, it is possible to securely lock the segments of pipe...
    When installing the radio a lot of time to spend on processing wires. First of all you need to remove the insulation, clean, tinned with stinging, and then proceed to soldering. Except...

Spelling error report

The following text will be sent to our editors: