A SUBSTITUTE PIN

A"REPLACEMENTCarton steel doors or bars on the Windows to the concrete or brick walls specialists usually fastened with sharp pins. If you need to remove the box, the case is difficult to pull the pins very difficult, and drown them interfere with the flattened outer ends. For these purposes I used the M10 screws, drilled them for the holes in the jamb with a diameter of 9.5 mm. If needed, you can screws to rotate, loosening their grip with the wall, and pull out tools at hand.
 
GLUKHOV, Saransk

Noticed mistape? Highlight it and press Ctrl+Enter, to inform us.

Recommend to read

  • THE FRAME — TIGHTLY!THE FRAME — TIGHTLY!
    Loose door frame is easy to fix, without resorting to the services of the master. Need to drill through it several through holes, going deep in the wall. This can be done with...
  • SCREW TIGHTLYSCREW TIGHTLY
    In cases when you want to prevent turning of the screw, screwed into a Board or plywood, I use a very simple way. Of stiff wire or a nail, whose diameter corresponds to the width of the...

Spelling error report

The following text will be sent to our editors: