Cord electric soldering iron is typically not heat-resistant insulation. Therefore at its hit on a hot tip, perhaps a quick melt insulation and short circuit of wires. To avoid this, it is necessary to wear a cord round the required number of ceramic insulators that are used in the irons and frying cabinets. Plug contemporary electric soldering iron in most cases, non-separable, so it should be removed and strung on the cord insulators, mounted on the end of wires modular plug.
Recommend to read
TOOTHED FORCEPS
An inexperienced installer, exposing the wire ends of the insulation, no-no and cuts one of the veins of the wire or, even worse, incision several, and they then break off at the most...
OPPRESSION WITHOUT OPPRESSION
Whatever containers for homemade pickles — from pans or buckets to the barrel after filling in the experienced owner necessarily puts on top of the circle, and his oppression: a stone or...
