
To straighten dents on the tin, usually use a rubber or plastic mallet, because metal drummer would leave sunken footprints in the soft material. If mallet is not at hand — you can use an ordinary hammer, but that he was “delicate”, the striker should put the rubber cap such as wheelchairs canes.
Recommend to read
FRAME TO THE MIRROR
MATERIAL: metal rod Ø3 mm, a rod of square cross section 8X8 mm, flat metal section 2X15 and 3X15 mm, plywood 10 mm thick, thin plywood, mirror, screws 4x10 mm, colorless furniture...
THE TRESTLES-IMPROMPTU
That usually takes home the wizard when you need to saw off the bar or the Board? Most often, kitchen stool, judging by the scars left on it by the saw. Meanwhile, it is easy to make...